Filter By

Reloadable

Reloadable rocket motors. Cheaper than Single-Use as only the propellant is replaced after each flight. Here you find only the casings, reloads are listed in their respective categories.

Active filters

  • Casing 38/720 - Aerotech

    €111.50

    High Power 38/720 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available
  • Extended Forward Closure...

    €65.00

    Extended forward plugged closure for Aerotech and Monster 54 mm reloadable rocket motors. It must be used with J90W, J135W, K185W, K270W Aerotech reloads, when the ejection charge is not needed.

    Available
  • Forward Closure 54 mm -...

    €62.50

    Standard forward closure for any 54 mm high power reloadable rocket motors. This is the usual closure with delay space and ejection charge receptacle.

    Available
  • Casing 29/60 - Aerotech

    €56.99

    High Power 29/60 reloadable motor casing only. Does not include closures. If you already own a 29 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available
  • Casing 29/100 - Aerotech

    €63.99

    High Power 29/100 reloadable motor casing only. Does not include closures. If you already own a 29 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available
  • Forward Seal Disk 75 mm -...

    €48.80

    Forward seal disc for Aerotech/Monster 75 mm reloadable motors. This is a replacement part, the disc is normally included in RMS 75/5120, RMS 75/6400 and RMS 75/7680 motor hardware. 

    Available
  • Reloadable motor P38-1G - CTI

    €46.95

    Reloadable 38mm motor Cesaroni P38-1G. The aft threaded closure is not required because it is included in the motor reload.

    Available
  • Forward Closure cieca 38 mm...

    €54.30

    Replacement part for all RMS-38 mm high power rocket motor systems. Use this plugged closure (no ejection charge) when you are using an electronic device for parachute ejection and your motor compartment is sealed.

    Available
  • Casing 75/6400 - Aerotech

    €619.00

    High Power 75/6400 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available
  • Casing 38/120 - Aerotech

    €63.99

    High Power 38/120 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available
  • RDDT - RMS Delay Drilling...

    €27.99

    The Aerotech RMS Delay Drilling Tool is used to shorten the delay time of the RDK, HDK and HDK+ delays used in the Aerotech reloadable motors. By adjusting the delay time you can get the parachute ejected at the perfect flight time you calculated.

    Available
  • 29 mm Reload Adapter System...

    €63.99

    Get the most out of your reloadable 29 mm motors.
    The Reload Adapter System allows the use of many types of reloads with only a few different engine cases, which saves on their purchase.

    Available