Filtrovat podle

Dobíjecí

Dobíjecí raketové motory. Levnější než na jedno použití, protože po každém letu se vyměňuje pouze pohonná hmota. Zde najdete pouze pouzdra, přebití jsou uvedena v příslušných kategoriích.

Aktivní filtry

  • Spacer P54-SP – CTI
    Rychlý náhled

    Spacer P54-SP – CTI

    23,99 €

    Spacer to use a shorter Cesaroni 38 mm reload in a longer 38 mm Pro38 reloadable motor.

    Vyprodáno
  • Pro38 - Starter Kit - CTI
    Rychlý náhled

    Pro38 - Starter Kit - CTI

    229,95 €

    Set of 38mm Cesaroni P38 reloadable motors, to use all reloads from 1G to 6G. The Pro38 motors do not require the rear threaded closure because it is already included in the reloads.

    Available
  • Case P24-2G - CTI
    Rychlý náhled

    Case P24-2G - CTI

    33,95 €

    Casing for P24-2G CTI 24mm reloadable motor. Pro24 reloadable hardware includes the case only, NOT the Aft Closure.

    Available
  • Forward Seal Disk 75 mm - Aerotech
    Rychlý náhled

    Forward Seal Disk 75 mm -...

    48,80 €

    Forward seal disc for Aerotech/Monster 75 mm reloadable motors. This is a replacement part, the disc is normally included in RMS 75/5120, RMS 75/6400 and RMS 75/7680 motor hardware. 

    Available
  • Casing 75/6400 - Aerotech
    Rychlý náhled

    Case 75/6400 - Aerotech

    619,00 €

    High Power 75/6400 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available
  • Casing 75/5120 - Aerotech
    Rychlý náhled

    Case 75/5120 - Aerotech

    577,00 €

    High Power 75/5120 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Vyprodáno
  • Casing 75/3840 - Aerotech
    Rychlý náhled

    Case 75/3840 - Aerotech

    543,00 €

    High Power 75/3840 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Vyprodáno
  • Casing 75/2560 - Aerotech
    Rychlý náhled

    Case 75/2560 - Aerotech

    344,00 €

    High Power 75/2560 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available
  • 54 mm Reload Adapter System - Aerotech
    Rychlý náhled

    54 mm Reload Adapter System...

    86,99 €

    Get the most out of your reloadable 54 mm motors.
    The Reload Adapter System allows the use of many types of reloads with only a few different engine cases, which saves on their purchase.

    Vyprodáno
  • 29 mm Reload Adapter System - Aerotech
    Rychlý náhled

    29 mm Reload Adapter System...

    63,99 €

    Get the most out of your reloadable 29 mm motors.
    The Reload Adapter System allows the use of many types of reloads with only a few different engine cases, which saves on their purchase.

    Skladem
  • 38 mm Reload Adapter System - Aerotech
    Rychlý náhled

    38 mm Reload Adapter System...

    70,99 €

    Get the most out of your reloadable 38 mm motors.
    The Reload Adapter System allows the use of many types of reloads with only a few different engines, which saves on their purchase.

    Vyprodáno
  • Picture of assembled UDDT - Universal Delay Drilling Tool
    Rychlý náhled

    UDDT - Universal Delay...

    13,99 €

    Set the delay of your Aerotech reload

    The Universal Delay Drilling Tool is used to shorten the delay time of Aerotech RMS-EZ reloads. By adjusting the delay time you can get the parachute ejected at the perfect flight time you calculated.

    Skladem
  • Case P29-5G CTI
    Rychlý náhled

    Case P29-5G CTI

    64,95 €

    Casing for P29-5G CTI 29 mm reloadable motor. Pro29 reloadable hardware includes the case only, NOT the Aft Closure. Uses high power H reload kits that can be purchased by owner of an HPR Certification Level 1 

    Vyprodáno
  • Case P29-1G CTI
    Rychlý náhled

    Case P29-1G CTI

    44,95 €

    Casing for P29-1G CTI 29mm reloadable motor. Pro29 reloadable hardware includes the case only, NOT the Aft Closure.

    Available
  • Forward Closure Retainer Ring 38 mm
    Rychlý náhled

    Forward Closure Retainer...

    31,99 €

    This retainer ring replaces the standard forward closure of 38 mm RMS motors when using RMS-EZ reloads

    Skladem
  • Casing 29/100 - Monster Motors
    Rychlý náhled

    Case 29/100 - Aerotech

    63,99 €

    High Power 29/100 reloadable motor casing only. Does not include closures. If you already own a 29 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available