Spacer to use a shorter Cesaroni 38 mm reload in a longer 38 mm Pro38 reloadable motor.

Set of 38mm Cesaroni P38 reloadable motors, to use all reloads from 1G to 6G. The Pro38 motors do not require the rear threaded closure because it is already included in the reloads.

Casing for P24-2G CTI 24mm reloadable motor. Pro24 reloadable hardware includes the case only, NOT the Aft Closure.

Forward seal disc for Aerotech/Monster 75 mm reloadable motors. This is a replacement part, the disc is normally included in RMS 75/5120, RMS 75/6400 and RMS 75/7680 motor hardware. 

High Power 75/6400 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

High Power 75/5120 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

High Power 75/3840 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

High Power 75/2560 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

Get the most out of your reloadable 54 mm motors.
The Reload Adapter System allows the use of many types of reloads with only a few different engine cases, which saves on their purchase.

Get the most out of your reloadable 29 mm motors.
The Reload Adapter System allows the use of many types of reloads with only a few different engine cases, which saves on their purchase.

Get the most out of your reloadable 38 mm motors.
The Reload Adapter System allows the use of many types of reloads with only a few different engines, which saves on their purchase.

Set the delay of your Aerotech reload

The Universal Delay Drilling Tool is used to shorten the delay time of Aerotech RMS-EZ reloads. By adjusting the delay time you can get the parachute ejected at the perfect flight time you calculated.

Casing for P29-5G CTI 29 mm reloadable motor. Pro29 reloadable hardware includes the case only, NOT the Aft Closure. Uses high power H reload kits that can be purchased by owner of an HPR Certification Level 1 

Casing for P29-1G CTI 29mm reloadable motor. Pro29 reloadable hardware includes the case only, NOT the Aft Closure.

This retainer ring replaces the standard forward closure of 38 mm RMS motors when using RMS-EZ reloads

High Power 29/100 reloadable motor casing only. Does not include closures. If you already own a 29 mm High Power RMS motor, with this case you can use all the reloads kits made for it.