Reference: LOPMM293
Brand: LOC/Precision
Motor mount tube 29x30 cm - LOC/Precision
Kraft cardboard tube to make 29 mm rocket motor mounts, 30 cm long.
€3.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: KLPTC75S
Brand: Klima
TC-75/75 - Tube coupler - Klima
Coupler for Klima T-75 rocket body tubes. Short length (75 mm)
€2.50
Reference: LOPTC114
Brand: LOC/Precision
TC-1.14 - Tube Coupler LOC
Tube coupler for BT-1.14 (29 mm) LOC tubes
€3.20
Reference: SFPSW135
Brand: Sierrafox
Barrel Swivel SW-1350
Very robust barrel swivel (supports 610 Kg) for attaching the parachute in large rocket models. The swivel allows the rotation of the parachute and prevents the lines from twisting.
€3.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
UDDT - Universal Delay Drilling Tool - Aerotech
Set the delay of your Aerotech reload
The Universal Delay Drilling Tool is used to shorten the delay time of Aerotech DMS single-use.
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
Description
Adjust the delay as you need!
Aerotech DMS high power single-use motors have a forward closure with the delay element already installed. The delay time is set to the maximum value allowed for each motor, therefore you need to shorten it depending on your rocket requirement.
The UDDT allows you to take 2, 4, 6 or 8 seconds out of the delay by drilling a hole into it. The tool consists in a cylindrical body with a different depth receptacle on both sides, plus an handle with a drilling bit and a spacer. Depending the side you put the forward closure against, it takes 4 or 8 second off the delay, but 2 seconds can be subtracted from this time using the included spacer. In this way you can shorten the delay of 2, 4, 6 and 8 seconds.
When to use this tool?
The UDDT is required to adjust the delay of any Aerotech DMS 38 mm motor
Product Details
ATRUDDT3
Set the delay of your Aerotech reload
The Universal Delay Drilling Tool is used to shorten the delay time of Aerotech DMS single-use.