Reference: LOPMM293
Brand: LOC/Precision
Motor mount tube 29x30 cm - LOC/Precision
Kraft cardboard tube to make 29 mm rocket motor mounts, 30 cm long.
€3.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: KLPTC75S
Brand: Klima
TC-75/75 - Tube coupler - Klima
Coupler for Klima T-75 rocket body tubes. Short length (75 mm)
€2.50
Reference: LOPTC114
Brand: LOC/Precision
TC-1.14 - Tube Coupler LOC
Tube coupler for BT-1.14 (29 mm) LOC tubes
€3.20
Reference: SFPSW135
Brand: Sierrafox
Barrel Swivel SW-1350
Very robust barrel swivel (supports 610 Kg) for attaching the parachute in large rocket models. The swivel allows the rotation of the parachute and prevents the lines from twisting.
€3.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
Reference: ACPCUTRO
Brand: Olfa
Rotating cutter
Cutter with circular blade to cut thin materials like paper, fiberglass clothes, carbon fibre clothes.
€9.99
Reference: ACPMTT06
Brand: Tamiya
Masking Tape Tamiya 6 mm
Thin masking paper tape, developed specifically for model applications. Width 6 mm.
€10.50
Reference: ACPMTT18
Brand: Tamiya
Masking Tape Tamiya 18 mm
Thin masking paper tape, developed specifically for model applications. Width 18 mm.
€12.50
Reference: ATCFCP29
Brand: Aerotech
Forward Closure plugged 29 mm - Aerotech
Replacement part for all RMS-29mm high power rocket motor systems. Use this plugged closure (no ejection charge) when you are using an electronic device for parachute ejection and your motor compartment is sealed.
€40.50
Reference: KLPKEVLA
Brand: Klima
Kevlar thread
Flame proof Kevlar thread, useful to make shock cords in small rockets.
€3.00
Reference: ACPCAUM5
Brand: Inoxmare
Stainless steel U-Bolt M5
Stainless steel (A4/AISI316) U-Bolt for parachute anchoring.
€6.50
Reference: KLPT2638
Brand: Klima
Body Tube T-26/385 - Klima
Cardboard body tube for model rockets construction. External diameter 26 mm
€3.60
Reference: KLPANR18
Brand: Klima
Motor block 18 mm - Klima
Cardboard thrust ring for 18 mm motor tubes
€2.50
Reference: KLPC1826
Brand: Klima
CR 18-26 – Centering rings Klima
Package of cardboard centering rings to mount 18 mm tubes into Klima T-26 mm tubes
€2.50
€3.30
Reference: ACPS1318
Brand: Quest
Motor mount 13/18 mm
Motor mount kit to adapt 13 mm rocket rocket motors to 18 mm tubes
€3.00
Reference: ESPPAR06
Brand: Estes
Plastic parachute Estes 15 cm (6”)
Colorful, pre-assembled, 15 cm (6") plastic parachute. Useful as replacement for Estes or similar rockets.
€3.69
€61.00
Reference: ACPMTB25
Brand: 3M
Blue Masking Tape 24 mm
3M Blue Masking Tape High quality for painting with clean edges and for many other uses. Width 24 mm.
€7.50
Reference: ATRG7607
Brand: Aerotech
G76-7G - Aerotech reload 29 mm
Package of one G76 reload with Mojave Green propellant and 7-second delay. For the Aerotech RMS 29/40-120 motor.
€39.95
Reference: ATRI245G
Brand: Aerotech
I245G-14A - Reload 38 mm Aerotech
I245 Mojave Green reload for RMS-38/240 reloadable motor. With a delay of 14 seconds adjustable.
€99.95
Reference: ATRI154J
Brand: Aerotech
I154J-10A - Reload 38 mm Aerotech
I154 Black Jack reload for RMS-38/480 reloadable motor.With a delay of 10 seconds adjustable.
€109.95
Reference: ATMG8013
Brand: Aerotech
G80-13T - Aerotech Single Use Motor 29 mm
G80 Blue Thunder Single-Use 29mm motors, with 13-second delay.
€49.95
€54.50
Reference: ACPPENN6
Brand: Great Planes
Epoxy brushes (6)
Brushes for spreading laminating epoxy resin or reaching difficult places.
€2.50