Reference: PMPCBP30
Brand: Public Missiles Ltd.
Coupler Bulk Plate CBP-3.0 - Public Missiles Ltd.
Plywood disc for making a bulkhead (frame) for Public Missiles Ltd. 75 mm tube couplers (PT-3.0 or QT-3.0)
€6.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: PMPCBP21
Brand: Public Missiles Ltd.
Coupler Bulk Plate CBP-2.1 - Public Missiles Ltd.
Plywood disc for making a bulkhead (frame) for Public Missiles Ltd. 54 mm tube couplers (PT-2.1 or QT-2.1)
€4.50
Reference: ATKHVARC
Brand: Aerotech
Rocket kit HV Arcas - Aerotech
A scale model for fantastic mid-power flights.An uncompromising kit that allows you to build a replica of one of the most famous sounding-rocket ever.
€136.50
Reference: ATKIQSYT
Brand: Aerotech
Rocket kit IQSY Tomahawk - Aerotech
Another great model to introduce you to the mid-power.A scale replica of a famous sounding rocket, small in size and peefect to move to higher-level kits.
€122.50
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
Reference: KLPASTA3
Brand: Klima
Launch rod 3 mm
3 mm diameter launch rod, 88 cm long, for rockets with A, B and C motors.
€2.40
Reference: JLEALTI1
Brand: Jolly Logic
AltimeterOne electronic altimeter
The AltimeterOne is the easiest way to find out how high your rocket went. Just latch it on the bottom of the nose cone, and launch it. The LCD display shows the exact peak altitude reached by your rocket.
€77.90
Reference: KLPASTA6
Brand: Klima
Launch Rod 6 mm
6 mm diameter launch rod, 116 cm long, to launch rockets with E, F and G motors, or motor clusters.
€6.99
Reference: KLPCL9VO
Brand: Klima
Klima Launch Controller 9 volts
Model rocket launch controller. For rockets with Estes or Klima motors and small composite motors with Sierrafire XS or S ignitors. Ergonomic shape with LED and beeper for continuity. Uses one or two 9 volt batteries.
€20.90
Reference: KLPRAMLA
Brand: Klima
Launch Pad Klima
Launch pad for mid-sized rockets, at a very low cost. Can be used for smaller rockets as well. The legs are unmountable for an easy transportation. Ideal for rockets with D and E motors.
€26.50
Reference: MWELCDT0
Brand: Missile Works
LCDT - LCD terminal - Missile Works
LCD terminal for configuring and reading data from the RRC2L and RRC3 Missile Works altimeters
€48.00
Reference: ESPCLPS2
Brand: Estes
Launch controller PS II - Estes
Model rocket launch controller for large rockets (E motors and above) but suitable for any rocket size.
€65.90
Reference: AMETELMTR
Brand: Altus Metrum
Altus Metrum TeleMetrum v4.0
Recording dual-deployment altimeter for high power model rocketry with integrated GPS and telemetry link.
€379.99
Reference: ESEALTIM
Brand: Estes
Altimeter Estes
Digital altimeter to be mounted on board rocket models to know the altitude reached.
€61.90
Reference: ESPCLELB
Brand: Estes
Electron Beam Launch Controller - Estes
Electric launch controller for small model rockets, with motors up to D.
€41.00
Reference: ESPRLPS2
Brand: Estes
Launch Pad PS II - Estes
Large launch pad for mid-power rockets with motors E, F, G.
€80.00
Reference: ESPGTTUB
Brand: Estes
Tube cutting guide - Estes
Set of guides to cut Estes model rocket body tubes with ease and precision.
€15.00
Reference: ESPGUALA
Brand: Estes
Fin alignment guide - Estes
<p>Set of guides to correctly mount the fins on the body of model rockets. With this accessory your fins will be glued perfectly straight and correctly spaced without any effort.</p>
€29.50
Reference: ACPCUTRO
Brand: Olfa
Rotating cutter
Cutter with circular blade to cut thin materials like paper, fiberglass clothes, carbon fibre clothes.
€9.99
Reference: ACPMTT06
Brand: Tamiya
Masking Tape Tamiya 6 mm
Thin masking paper tape, developed specifically for model applications. Width 6 mm.
€10.50
Reference: ACPMTT18
Brand: Tamiya
Masking Tape Tamiya 18 mm
Thin masking paper tape, developed specifically for model applications. Width 18 mm.
€12.50
Reference: ACPMTB25
Brand: 3M
Blue Masking Tape 24 mm
3M Blue Masking Tape High quality for painting with clean edges and for many other uses. Width 24 mm.
€7.50
Reference: ACPPENN6
Brand: Great Planes
Epoxy brushes (6)
Brushes for spreading laminating epoxy resin or reaching difficult places.
€2.50
€38.99
Reference: ACPCOP28
Brand: Great Planes
Mix-Rite cups 28 gr
Disposable plastic cups for mixing resins, glues, paint.
€2.50