Reference: LOPMM293
Brand: LOC/Precision
Motor mount tube 29x30 cm - LOC/Precision
Kraft cardboard tube to make 29 mm rocket motor mounts, 30 cm long.
€3.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: KLPTC75S
Brand: Klima
TC-75/75 - Tube coupler - Klima
Coupler for Klima T-75 rocket body tubes. Short length (75 mm)
€2.50
Reference: LOPTC114
Brand: LOC/Precision
TC-1.14 - Tube Coupler LOC
Tube coupler for BT-1.14 (29 mm) LOC tubes
€3.20
Reference: SFPSW135
Brand: Sierrafox
Barrel Swivel SW-1350
Very robust barrel swivel (supports 610 Kg) for attaching the parachute in large rocket models. The swivel allows the rotation of the parachute and prevents the lines from twisting.
€3.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
Rocket kit Big Daddy - Estes
Large flying model rocket for D and E motors.
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
Description
The Big Daddy is back and better than ever! It can fly over twice as high as the old grandpa version. It now uses also E engines, has laser cut fins and has a new contemporary look. This big guy can also be launched on Estes C11 and D engines. Requires a 3/16" (5mm) launch rod - sold separately.
E engine launches require the Estes Porta-Pad E Launch Pad and and the E Launch Controller or any launch controller with 10 m long ignition wires - sold separately.
Engines, glue and paints not included.
What you need to build it (not included):
Cutter, scissors, ruler, pencil, aliphatic glue, masking tape, transparent adhesive tape, fine abrasive paper, spray paints.
What you need to fly it (not included):
- Launch pad with 5 mm rod
- Launch controller (if using Aerotech engines it must be 12 volts)
- Engines (see list of recommended engines)
- Flameproof wadding or parachute protection sheets
Product Details
ESKBIGDA
Data sheet
- Length
- 48.3 cm
- Diameter
- 75 mm
- Weight
- 150 g
- Motor diameter
- 24 mm
- Recovery
- 61 cm plastic parachute
- Launch pad
- With 5 mm launch rod
Estes: C11-3, D12-3, D12-5, E12-4, E12-6
TSP: D12-4, D20-4, E12-4, E20-6
Large flying model rocket for D and E motors.