Reference: RKPBT300
Brand: LOC/Precision
Body Tube 3" - Rocketarium
High-quality kraft cardboard body tube. Fully compatible with LOC/Precision tubes of the same diameter (BT-3.00), this tube is slightly longer.
€18.90
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: RKKSA2GU
Brand: Rocketarium
SA-2 Guideline - Rocketarium
The SA-2 "Guideline" is a scale model rocket of the real Soviet surface-to-air missile. As a mid-size rocket, it flies with D, E nad some F motors.
€63.90
Reference: LMRPAR15
Brand: LMR Technology
Parachute xChute 1500
The xChute 1500 is a cross-shaped parachute for the heavier rockets or other applications where a stable parachute with minimal horizontal drift is important. Suitable for HPR rockets as a main parachute in dual deployment recovery.
€96.90
Reference: LMRPAR12
Brand: LMR Technology
Parachute xChute 1200
The xChute 1200 is a cross-shaped parachute for heavy rockets or other applications where a stable parachute with minimal horizontal drift is important.
€79.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
Centering ring set 3.90-38 mm - LOC/Precision
Set of plywood centering discs for mounting a 38 mm motor mount tube in a 100 mm (3.9") body.
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
Description
This set of plywood discs allows you to build a 38mm engine motor mount in a 100 mm fuselage tube, type LOC 3.90" or PML 3.9"
The set consists of three discs made of high-quality 6 mm thick birch plywood. One of the discs has a hole into which the screw ring (included) for attaching the parachute cord is inserted. Also included in the set is a simple motor fixing system that screws onto the lower disc.
Contains:
- 3 centering discs 3.9"-38 mm in plywood, 6 mm thick
- 1 screw ring with nut and washers
- 1 motor fixing clip with screws
Product Details
LOPC3938
Set of plywood centering discs for mounting a 38 mm motor mount tube in a 100 mm (3.9") body.