- Out-of-Stock
Reference: LOPMM293
Brand: LOC/Precision
Motor mount tube 29x30 cm - LOC/Precision
Kraft cardboard tube to make 29 mm rocket motor mounts, 30 cm long.
€3.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: KLPTC75S
Brand: Klima
TC-75/75 - Tube coupler - Klima
Coupler for Klima T-75 rocket body tubes. Short length (75 mm)
€2.50
Reference: LOPTC114
Brand: LOC/Precision
TC-1.14 - Tube Coupler LOC
Tube coupler for BT-1.14 (29 mm) LOC tubes
€3.20
Reference: SFPSW135
Brand: Sierrafox
Barrel Swivel SW-1350
Very robust barrel swivel (supports 610 Kg) for attaching the parachute in large rocket models. The swivel allows the rotation of the parachute and prevents the lines from twisting.
€3.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
Extended Forward Closure threaded and plugged - 54 mm - Aerotech
Extended forward plugged and threaded closure for Aerotech 54 mm reloadable rocket motors.
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
Description
Extended forward closure (delay side) for any 54 mm reloadable rocket motor. It must be used with long burn Aerotech reloads J90W, J135W, K185W, K270W when the ejection charge is not needed because the recovery system is ejected by an altimeter or other electronic device. The threaded part is used to retain the motor through a threaded rod. Compatible with Aerotech, Dr Rocket and Aerotech reloadable motors.
Size
Length (extruding part w/o threaded part): 29,6 mm
Length of threaded part: 9 mm
Diameter (extruding part w/o threaded part): 38 mm
Diameter of threaded part: 25,4
Thread pitch: 5/16" x 18 TPI (US thread)
Product Details
ATCFCET5
Data sheet
- Diameter
- 54 mm
Extended forward plugged and threaded closure for Aerotech 54 mm reloadable rocket motors.