Reference: LOPMM293
Brand: LOC/Precision
Motor mount tube 29x30 cm - LOC/Precision
Kraft cardboard tube to make 29 mm rocket motor mounts, 30 cm long.
€3.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: KLPTC75S
Brand: Klima
TC-75/75 - Tube coupler - Klima
Coupler for Klima T-75 rocket body tubes. Short length (75 mm)
€2.50
Reference: LOPTC114
Brand: LOC/Precision
TC-1.14 - Tube Coupler LOC
Tube coupler for BT-1.14 (29 mm) LOC tubes
€3.20
Reference: SFPSW135
Brand: Sierrafox
Barrel Swivel SW-1350
Very robust barrel swivel (supports 610 Kg) for attaching the parachute in large rocket models. The swivel allows the rotation of the parachute and prevents the lines from twisting.
€3.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
Ultimate Tube Marking Guide - Estes
Guide to make markings on model rocket body tubes
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
Description
With this tube marking guide you will be able to draw lines down tubes of any sizes. Use it to draw fin alignement lines, to place fins straight along the longitudinal axis of the tube.
The Ultimate marking Guide has seven different straight edges, so you will always find an edge with half the height of the tube you are going to mark. This allows for very straight lines as the pen is guided along the full lenght and you don't need a steady hand to keep it at the same angle as you trace your line.
The Ultimate Tube Marking Guide works with any Estes or similar tubes, from BT-5 up to BT-60.
It is also suitable for other tubes from 15 mm to 50 mm. Drawing a line on a BT-80 and any 66 mm tube is less critical because of its size, you can use any straight edge of the guide.
Product Details
ESPGTTUL
Specific References
- EAN13
- 0047776022287
Guide to make markings on model rocket body tubes