Reference: LOPMM293
Brand: LOC/Precision
Motor mount tube 29x30 cm - LOC/Precision
Kraft cardboard tube to make 29 mm rocket motor mounts, 30 cm long.
€3.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: KLPTC75S
Brand: Klima
TC-75/75 - Tube coupler - Klima
Coupler for Klima T-75 rocket body tubes. Short length (75 mm)
€2.50
Reference: LOPTC114
Brand: LOC/Precision
TC-1.14 - Tube Coupler LOC
Tube coupler for BT-1.14 (29 mm) LOC tubes
€3.20
Reference: SFPSW135
Brand: Sierrafox
Barrel Swivel SW-1350
Very robust barrel swivel (supports 610 Kg) for attaching the parachute in large rocket models. The swivel allows the rotation of the parachute and prevents the lines from twisting.
€3.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
Rocket kit 220 Swift - Estes
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
Description
This fun and easy to build "itty-bitty" rocket really scoots through the sky. The 220 Swift is sleek and launches on mini-engines then tumbles back to earth.
Engines, glue and paints not included.
Length: 11.4 cm
Diameter: 13.7 mm
Weight (without motor): 2.7 gr
Recovery: featherweight
Fins: die cut balsa
Launch rod required: 3 mm
Recommended engines: 1/4A3-3T, 1/2A3-4T, A3-4T
WHAT YOU NEED TO BUILD IT: Scissors, pencil, ruler, fine sandpaper, carpenter’s glue, plastic cement, hobby knife, masking tape, primer, paint. (Tools, construction and finishing supplies not included.)
WHAT YOU NEED TO LAUNCH IT (sold separately): Estes Porta-Pad II Launch Pad or Klima Launch Pad with 5 mm launch rod, Estes Electron Beam Launch Controller or Klima Launch Controller, model rocket engines, starters and recovery wadding.
Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
Product Details
ESK220SW
Data sheet
- Length
- 114 mm
- Diameter
- 14 mm
- Weight
- 2.7 g
- Motor diameter
- 13 mm
- Recovery
- Featherweight
- Launch pad
- With 3 mm launch rod
Specific References
- EAN13
- 0047776008106
Accessories
Reference: ESPPOPA2
Brand: Estes
Launch pad Porta Pad II - Estes
Plastic launch pad for small model rockets with A, B and C motors. Can be tilted against the wind.
€33.50
Reference: ESPCLELB
Brand: Estes
Electron Beam Launch Controller - Estes
Electric launch controller for small model rockets, with motors up to D.
€41.00
Reference: KLPRAMLA
Brand: Klima
Launch Pad Klima
Launch pad for mid-sized rockets, at a very low cost. Can be used for smaller rockets as well. The legs are unmountable for an easy transportation. Ideal for rockets with D and E motors.
€26.50
Reference: KLPCL9VO
Brand: Klima
Klima Launch Controller 9 volts
Model rocket launch controller. For rockets with Estes or Klima motors and small composite motors with Sierrafire XS or S ignitors. Ergonomic shape with LED and beeper for continuity. Uses one or two 9 volt batteries.
€20.90