- Out-of-Stock
Reference: LOPMM293
Brand: LOC/Precision
Motor mount tube 29x30 cm - LOC/Precision
Kraft cardboard tube to make 29 mm rocket motor mounts, 30 cm long.
€3.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: KLPTC75S
Brand: Klima
TC-75/75 - Tube coupler - Klima
Coupler for Klima T-75 rocket body tubes. Short length (75 mm)
€2.50
Reference: LOPTC114
Brand: LOC/Precision
TC-1.14 - Tube Coupler LOC
Tube coupler for BT-1.14 (29 mm) LOC tubes
€3.20
Reference: SFPSW135
Brand: Sierrafox
Barrel Swivel SW-1350
Very robust barrel swivel (supports 610 Kg) for attaching the parachute in large rocket models. The swivel allows the rotation of the parachute and prevents the lines from twisting.
€3.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
Forward Closure threaded and plugged - 54 mm - Aerotech
Forward plugged and threaded closure for Aerotech 54 mm reloadable rocket motors. It is used when the ejection charge is not needed and to retain the motor through a threaded rod.
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
Description
Forward closure (delay side) for any 54 mm reloadable rocket motor, without ejection charge receptacle and with a threaded part used to retain the motor through a threaded rod.
Size
Length (extruding part w/o threaded part): 16,9 mm
Length of threaded part: 9 mm
Diameter (extruding part w/o threaded part): 38 mm
Diameter of threaded part: 25,4
Thread pitch: 5/16" x 18 TPI (US thread)
Product Details
ATCFCT54
Data sheet
- Diameter
- 54 mm
Forward plugged and threaded closure for Aerotech 54 mm reloadable rocket motors. It is used when the ejection charge is not needed and to retain the motor through a threaded rod.