- Out-of-Stock
Reference: LOPMM293
Brand: LOC/Precision
Motor mount tube 29x30 cm - LOC/Precision
Kraft cardboard tube to make 29 mm rocket motor mounts, 30 cm long.
€3.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: KLPTC75S
Brand: Klima
TC-75/75 - Tube coupler - Klima
Coupler for Klima T-75 rocket body tubes. Short length (75 mm)
€2.50
Reference: LOPTC114
Brand: LOC/Precision
TC-1.14 - Tube Coupler LOC
Tube coupler for BT-1.14 (29 mm) LOC tubes
€3.20
Reference: SFPSW135
Brand: Sierrafox
Barrel Swivel SW-1350
Very robust barrel swivel (supports 610 Kg) for attaching the parachute in large rocket models. The swivel allows the rotation of the parachute and prevents the lines from twisting.
€3.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
Reloadable motor P38-2G - CTI
Reloadable 38mm motor Cesaroni P38-1G. The aft threaded closure is not required because it is included in the motor reload.
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
Description
Pro-38 reloadable motor hardware is very easy to use. Select your reload, adjust the delay following your needs, push the reload into the casing and thread the rear closure. You do not need any additional closure because are both included in each reload. After each flight you just have to dispose of the burned reload and clean the motor. The motor can be used an indefinite number of times.
Cesaroni hardware is very easy to clean after each flight with damp cloth as the reloads do not leave many residues on the internal surface.
You can use reloads made for P38-1G motors by using one Pro38 Spacer. Please remember these casings are not compatible with Aerotech reloads.
When to use this engine?
This motor uses H type reloads therefore is an ideal choice for your Level 1 certification flight with rockets with a 38 mm motor mount.
The following reloads can be used with this motor (Level 1 certification required):
266H125-12A
286H100-15A
261H120-14A
232H123-14A
276H152-15A
247H143-13A
273H225-14A
269H110-14A
255H400-13A
Product Details
CTM3802G
Data sheet
- Length
- 175 mm
- Diameter
- 38 mm
- Weight
- 87,7 g
Reloadable 38mm motor Cesaroni P38-1G. The aft threaded closure is not required because it is included in the motor reload.