Reference: LOPMM293
Brand: LOC/Precision
Motor mount tube 29x30 cm - LOC/Precision
Kraft cardboard tube to make 29 mm rocket motor mounts, 30 cm long.
€3.50
- There are no more items in your cart
- Shipping
- Total €0.00
New products
Reference: KLPTC75S
Brand: Klima
TC-75/75 - Tube coupler - Klima
Coupler for Klima T-75 rocket body tubes. Short length (75 mm)
€2.50
Reference: LOPTC114
Brand: LOC/Precision
TC-1.14 - Tube Coupler LOC
Tube coupler for BT-1.14 (29 mm) LOC tubes
€3.20
Reference: SFPSW135
Brand: Sierrafox
Barrel Swivel SW-1350
Very robust barrel swivel (supports 610 Kg) for attaching the parachute in large rocket models. The swivel allows the rotation of the parachute and prevents the lines from twisting.
€3.90
Reference: ACPEMATC
Brand: Sierrafox
E-match (chip-type)
E-match for ejection charges. To be used with altimeters or other electronic devices.
€0.79
Reference: ESMB0604
Brand: Estes
Estes rocket motors B6-4
Maximum versatility for any rocket.Among the most used rocket motors ever, the Estes B6-4 is the motor suitable for the largest majority of Estes and similar rockets.
€15.95
Reference: ESMC0605
Brand: Estes
Estes rocket motors C6-5
Motors C, 18 mm, for model rockets. Delay 5 seconds, for single-stage rockets.
€17.70
-
Banner
BT-50 "E" Reinforced Motor Mount Tube
Strengthened tube to accommodate 24x95 mm (E-type) motors in your own rocket designs.
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
Description
Vulcanized fiber motor support tube, to accommodate 95 mm long 24 mm motors (such as TSP E-type motors) in your own rocket designs. This is a necessary part if you're building your own rocket design. This special type of tube is much stronger than a standard kraft cardboard tube but almost as light.
This tube will be supported by centering rings of the appropriate diameter for the rocket body you're building.
Product Details
RKPTM2ER
Data sheet
- Length
- 108 mm
- Outer diameter
- 24,9 mm
- Inner diameter
- 24,1 mm
- Material
- Vulcanized Paper
Strengthened tube to accommodate 24x95 mm (E-type) motors in your own rocket designs.