Hoja informativa

Suscríbete a nuestro boletín

Case P29-5G CTI

Casing for P29-5G CTI 29 mm reloadable motor. Pro29 reloadable hardware includes the case only, NOT the Aft Closure. Uses high power H reload kits that can be purchased by owner of an HPR Certification Level 1 

64,95 €
Impuestos incluidos
Fuera de stock


Pagos seguros: Tarjeta de crédito, PayPal, Transferencia bancaria


Envío rápido: enviamos a todo el mundo


Devoluciones sencillas de kits y accesorios

This motor has the same size of an Aerotech RMS 29/240 high power reloadable motor and can be used in kits designed for these.

Pro-29 reloadable motor hardware is very easy to use. Select your reload, adjust the delay following your needs (with Pro38-DAT tool and P29-CR adapter, not included), push the reload into the casing and add the threaded rear closure. You do not need any forward closure because it is included in each reload.

After each flight you just have to dispose of the burned reload and clean the motor. The motor can be used an indefinite number of times.

Cesaroni hardware is very easy to clean after each flight with damp cloth as the reloads do not leave many residues on the internal surface. You can use reloads made for P29-3G and P29-2G motors by using one or two Pro29 Spacers.

Please remember these casings are not compatible with Aerotech reloads.

When to use this engine?

This is a good motor for all rockets designed for high-end H motors, and also to obtain your Level 1 high power certification.

The following reloads can be used with this motor (Level 1 certification required):



Ficha técnica

275,6 mm
29 mm
92,4 gr