Super Nova - Estes
Two stage model rocket with transparent payload compartment, for B and C motors.
Secure payments: Credit Card, PayPal, Bank Transfer
Fast Shipping - We ship worldwide
Easy returns for kits and accessories
The Supernova is a two-stage model rocket capable of reaching high altitudes while using cheap engines as type B and C. The fins of the first stage are "reversed" and give the rocket the truly unique aspect.
The Supernova can also bring a small payload like a mini-altimeter aloft, in its transparent compartment. The construction is traditional, the fins are laser cut balsa to be finished and glued. The model is then colored as you wish or following the pattern shown on the packaging.
This rocket requires a launching pad with 3 mm launch rod like the Estes Porta Pad II, the Estes Astron Launch Pad or the Klima Launch Pad, and an electric launch controller as the Estes Electron Beam, the Estes Astron Launch Controller or the Klima Launch Controller.
The kit includes:
- Every part needed to build the rocket model (tubes, rings, plastic parts, etc.)
- Water decals
- Pre-assembled plastic parachutes
- Detailed instructions
WHAT YOU NEED TO BUILD IT: Scissors, pencil, ruler, fine sandpaper, carpenter’s glue, plastic cement, hobby knife, masking tape, primer, paint. (Tools, construction and finishing supplies not included.)
WHAT YOU NEED TO LAUNCH IT (sold separately): Estes Porta-Pad II Launch Pad or Klima Launch Pad with 5 mm launch rod, Estes Electron Beam Launch Controller or Klima Launch Controller, model rocket engines, starters and recovery wadding.
Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
- 25 mm
- 57 gr
- Motor mount
- 18 mm
- Plastic parachute and tumble recovery (booster stage)
- Launch pad
- Low power with 3 mm launch rod
- Rocket type
- With payload
Estes: B6-0, C6-0
Klima: B4-0, C6-0, D9-0
Estes: A8-5, B6-6, C6-7
Klima: C6-7, D9-7