Reloadable

Seal disk for Aerotech High Power reloadable motors RMS 38/480, RMS 38/600, RMS 38/720, and RMS 38/1080. Required for all the reloads used in these motors.

Standard forward closure for Monster 38 mm high power reloadable rocket motors. This is the usual closure with delay space and ejection charge receptacle.

Set the delay of your Aerotech reload

The Universal Delay Drilling Tool is used to shorten the delay time of Aerotech RMS-EZ reloads. By adjusting the delay time you can get the parachute ejected at the perfect flight time you calculated.

This retainer ring replaces the standard forward closure of 38 mm RMS motors when using RMS-EZ reloads

Seal disk for Aerotech High Power reloadable motors RMS 29/240 and RMS 29/360. Required for H210R, H220T, I200W e H268R reloads used in these motors.

Aerotech RMS 24/40 reloadable motor hardware set. Includes the casing, one forward closure and one aft closure. This motor is an ideal choice to give more power to rockets made for 24 mm motors like Estes D-type, or as your first reloadable. 

High Power 38/480 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

Adapter to use the Pro38-DAT delay tool with Cesaroni Pro24 reloads.

Reloadable 38mm motor Cesaroni P38-3G. The aft threaded closure is not required because it is included in the motor reload. Uses High Power reload kits of H and I class that can be purchased by owner of an HPR Certification Level 1

Forward seal disc for Aerotech/Monster 75 mm reloadable motors. This is a replacement part, the disc is normally included in RMS 75/5120, RMS 75/6400 and RMS 75/7680 motor hardware.