Filtern nach

Marke

Marke

Diameter

Diameter

Up to 29 mm

Reloadable motors up to 29 mm, for either Low Power and High Power reloads. Reloads are listed in their categories

Aktive Filter

  • Forward Seal Disk 29mm - Monster Motors
    Vorschau

    Forward Seal Disk 29mm -...

    17,50 €

    Seal disk for Aerotech High Power reloadable motors RMS 29/240 and RMS 29/360. Required for H210R, H220T, I200W e H268R reloads used in these motors.

    Available
  • Reloadable motor RMS 24/40 Aerotech
    Vorschau

    Reloadable motor RMS 24/40...

    77,50 €

    Aerotech RMS 24/40 reloadable motor hardware set. Includes the casing, one forward closure and one aft closure. This motor is an ideal choice to give more power to rockets made for 24 mm motors like Estes D-type, or as your first reloadable. 

    Available
  • Casing 29/100 - Monster Motors
    Vorschau

    Casing 29/100 - Aerotech

    63,99 €

    High Power 29/100 reloadable motor casing only. Does not include closures. If you already own a 29 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available
  • Casing 29/60 - Monster Motors
    Vorschau

    Casing 29/60 - Aerotech

    56,99 €

    High Power 29/60 reloadable motor casing only. Does not include closures. If you already own a 29 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Available
  • Casing P24-1G - CTI
    Vorschau

    Casing P24-1G - CTI

    21,95 €

    Casing for P24-1G Cesaroni 24mm reloadable motor. Pro24 reloadable hardware includes the case only, NOT the Aft Closure.

    Available
  • 29 mm Reload Adapter System - Aerotech
    Vorschau

    29 mm Reload Adapter System...

    63,99 €

    Get the most out of your reloadable 29 mm motors.
    The Reload Adapter System allows the use of many types of reloads with only a few different engine cases, which saves on their purchase.

    Auf Lager
  • Forward Closure 24 mm - Aerotech
    Vorschau

    Forward Closure 24 mm -...

    30,00 €

    Forward replacement closure for Aerotech 24 mm motor RMS 24/40

    Available
  • Reloadable motor RMS 24/60 - Aerotech
    Vorschau

    Reloadable motor RMS 24/60...

    83,70 €

    Aerotech reloadable motor RMS 24/60. Includes the casing, one forward closure, one aft closure. Designed to be used in rockets made for Estes E9 or E12 24mm engines.

    Available
  • Aft Closure P24-CL - CTI
    Vorschau

    Aft Closure P24-CL - CTI

    14,97 €

    Threaded rear closure for all Cesaroni Pro24 reloadable rocket motors.

    Nicht auf Lager
  • Forward Closure cieca 29 mm - Aerotech
    Vorschau

    Forward Closure cieca 29 mm...

    40,50 €

    Replacement part for all RMS-29mm high power rocket motor systems. Use this plugged closure (no ejection charge) when you are using an electronic device for parachute ejection and your motor compartment is sealed.

    Nicht auf Lager
  • Casing 29/180 - Monster Motors
    Vorschau

    Casing 29/180 - Aerotech

    77,99 €

    High Power 29/180 reloadable motor casing only. Does not include closures. If you already own a 29 mm High Power RMS motor, with this case you can use all the reloads kits made for it.

    Nicht auf Lager
  • Reloadable motor RMS RC24/20-40 - Aerotech
    Vorschau

    Reloadable motor RMS...

    121,90 €

    Aerotech RMS-RC 24/20-40 reloadable motor for rocket gliders. Includes a casing and an aft closure. Specifically designed to propel RC rocket gliders and airplanes, it uses reloads without parachute ejection charge.

    Nicht auf Lager