Reloadable rocket motors. Cheaper than Single-Use as only the propellant is replaced after each flight. Here you find only the casings, reloads are listed in their respective categories.
Seal disk for Aerotech High Power reloadable motors RMS 38/480, RMS 38/600, RMS 38/720, and RMS 38/1080. Required for all the reloads used in these motors.
Standard forward closure for Monster 38 mm high power reloadable rocket motors. This is the usual closure with delay space and ejection charge receptacle.
Seal disk for Aerotech High Power reloadable motors RMS 29/240 and RMS 29/360. Required for H210R, H220T, I200W e H268R reloads used in these motors.
Set the delay of your Aerotech reload
The Universal Delay Drilling Tool is used to shorten the delay time of Aerotech RMS-EZ reloads. By adjusting the delay time you can get the parachute ejected at the perfect flight time you calculated.
This retainer ring replaces the standard forward closure of 38 mm RMS motors when using RMS-EZ reloads
High Power 38/480 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
High Power 38/600 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
Reloadable 38mm motor Cesaroni P38-3G. The aft threaded closure is not required because it is included in the motor reload. Uses High Power reload kits of H and I class that can be purchased by owner of an HPR Certification Level 1
Adapter to use the Pro38-DAT delay tool with Cesaroni Pro24 reloads.