Model rocket kit, with balsa fins and "landing legs".
1 Elemento artículos
Advertencia: ¡Últimos artículos en inventario!
Disponible el: 0000-00-00
|Motor mount||18 mm|
|Launch pad||Low power - 3 mm launch rod|
|Recommended Engines||Estes: B6-4, C6-5 - Klima: B4-4, C6-5, D9-7|
The Sky Warrior is a model rocket kit to be assembled, for 18 mm rocket engines type B and C.
Beside its interesting size (almost 50 cm in total length) the peculiarity of this rocket is their three "legs" mounted on the fins, which simulate a landing system for space ships. These legs are alsol useful to support the rocket on the launch pad before the launch.
The assemblying is traditional, with pre-cut balsa fins to be finished and glued to the rocket body.
This rocket requires a launching pad with 3 mm launch rod like the Estes Porta Pad II, the Estes Astron Launch Pad or the Klima Launch Pad, and an electric launch controller as the Estes Electron Beam, the Estes Astron Launch Controller or the Klima Launch Controller.
Hobby knife, scissors, tweezers, ruler, pencil, aliphatic glue, plastic cement, permanent spray glue, cyanoacrylate glue, masking tape, transparent adhesive tape, fine sandpaper, spray paints