Super Nova - Estes

EST7248

Two stage model rocket with transparent payload compartment, for B and C motors.

Más detalles

1 Elemento

Advertencia: ¡Últimos artículos en inventario!

27,99 €

Ficha técnica

Diameter25 mm
Weight57 gr
Motor mount18 mm
RecoveryPlastic parachute and tumble recovery (booster stage)
Launch padLow power with 3 mm launch rod
Recommended EnginesBooster stage: Estes B6-0, C6-0 - Klima B4-0, C6-0, D9-0 Upper stage: Estes A8-5, B6-6, C6-7 - Klima C6-7, D9-7

Más

The Supernova is a two-stage model rocket capable of reaching high altitudes while using cheap engines as type B and C. The fins of the first stage are "reversed" and give the rocket the truly unique aspect.

The Supernova can also bring a small payload like a mini-altimeter aloft, in its transparent compartment. The construction is traditional, the fins are laser cut balsa to be finished and glued. The model is then colored as you wish or following the pattern shown on the packaging.

This rocket requires a launching pad with 3 mm launch rod like the Estes Porta Pad II, the Estes Astron Launch Pad or the Klima Launch Pad, and an electric launch controller as the Estes Electron Beam, the Estes Astron Launch Controller or the Klima Launch Controller.

The kit includes:

  • Every part needed to build the rocket model (tubes, rings, plastic parts, etc.)
  • Water decals
  • Pre-assembled plastic parachutes
  • Detailed instructions

To assemble the rocket you need (not included):

Hobby knife, scissors, tweezers, ruler, pencil, aliphatic glue, plastic cement, permanent spray glue, cyanoacrylate glue, masking tape, transparent adhesive tape, fine sandpaper, spray paints

To launch your rocket you need (not included):

  • Launch pad with 3 mm rod
  • Launch controller
  • Engines (see Recommended engine list)
  • Wadding or protective sheets for parachutes