Model rocket kit with dozens of parts to be cut, finish and assemble. A real treat for fans of the assembly!
1 Elemento artículos
Advertencia: ¡Últimos artículos en inventario!
Disponible el: 0000-00-00
|Motor mount||24 mm|
|Launch pad||5 mm|
|Recommended Engines||Estes: D12-3 - Aerotech Single Use: E15-4W - Aerotech RMS: D15-4T, E11-3J, E18-4W, F12-5J|
The Black Star Voyager is a flying model rocket with an aggressive and science-fiction shape, obtained with a set of parts in balsa wood and cardboard that are cut, finished and assembled. Get ready to spend hours of fun to mount this model because the parts included in the box are so many!
Most of the structure is made of balsa laser cut parts which must be assembled together to build parts of various shapes, and the fuselage has narrowings and decorations that are made by gluing strips and other details on the tube. For those who like to build is a blast!
The Black Star Voyager flies with 24mm motors, type D12, but can also use Aerotech 24mm motors, both single-use and reloadable.
This rocket requires a launching pad with 5mm launch rod like the Estes Porta Pad II or Estes E-Launch pad, and an electric launch controller as the Estes E-Launch Controller or Estes Electron Beam Launch Controller .
If you want to use this rocket with Aerotech motors, you will need a 12-volt launch controller as the Estes PS II Launch Controller or the Aerotech Interlock Controller.
Hobby knife, scissors, tweezers, ruler, pencil, aliphatic glue, plastic cement, permanent spray glue, cyanoacrylate glue, masking tape, transparent adhesive tape, fine sandpaper, spray paints