Black Star Voyager - Estes

EST7222

Nuevo

Model rocket kit with dozens of parts to be cut, finish and assemble. A real treat for fans of the assembly!

Más detalles

1 Elemento

Advertencia: ¡Últimos artículos en inventario!

49,99 €

Ficha técnica

Length101 cm
Diameter42 mm
Weight198 gr
Motor mount24 mm
RecoveryPlastic parachute
Launch pad5 mm
Recommended EnginesEstes: D12-3 - Aerotech Single Use: E15-4W - Aerotech RMS: D15-4T, E11-3J, E18-4W, F12-5J

Más

The Black Star Voyager is a flying model rocket with an aggressive and science-fiction shape, obtained with a set of parts in balsa wood and cardboard that are cut, finished and assembled. Get ready to spend hours of fun to mount this model because the parts included in the box are so many!

Most of the structure is made of balsa laser cut parts which must be assembled together to build parts of various shapes, and the fuselage has narrowings and decorations that are made by gluing strips and other details on the tube. For those who like to build is a blast!

The Black Star Voyager flies with 24mm motors, type D12, but can also use Aerotech 24mm motors, both single-use and reloadable.
This rocket requires a launching pad with 5mm launch rod like the Estes Porta Pad II or Estes E-Launch pad, and an electric launch controller as the Estes E-Launch Controller or Estes Electron Beam Launch Controller .

If you want to use this rocket with Aerotech motors, you will need a 12-volt launch controller as the Estes PS II Launch Controller or the Aerotech Interlock Controller.

The kit includes:

  • Every part needed to build the rocket model (tubes, rings, plastic parts, etc.)
  • Water decals
  • Pre-assembled plastic parachutes
  • Detailed instructions

To assemble the rocket you need (not included):

Hobby knife, scissors, tweezers, ruler, pencil, aliphatic glue, plastic cement, permanent spray glue, cyanoacrylate glue, masking tape, transparent adhesive tape, fine sandpaper, spray paints

To launch your rocket you need (not included):

  • 5 mm launch rod
  • Launch pad suitable for 5 mm rods
  • Launch controller
  • Engines (see Recommended engine list)
  • Wadding or protective sheets for parachutes