Nuevo Europa - Klima Ver más grande

Europa - Klima

Nuevo

Maxi-rocket with a cluster of five engines, mid-power at the cost of low-power!

Más detalles

54,50 €

Ficha técnica

Length101 cm
Diameter75 mm
Weight520 gr
Motor mount18 mm
Recovery70 cm nylon parachute
Launch pad6 mm launch rod
Recommended EnginesKlima: 2xC6-5 + 3xC6-P, 3xC6-7 + 2xD9-P, 2xC6-P + 3xD9-7, 2xD9-7 + 3xD9-P

Más

Europa takes its name from one of Jupiter's great satellites, and in fact is a very large model.

Thanks to its motor mount that can hold up to five 18 mm engines, Europe can rank among the largest mid-power models with the great advantage of using very economical engines while still having the same power as a much more expensive G engine.

Now you can build a powerful and spectacular model without needing to change your equipment, such as launch pad and launch controller!

The motor mount also allows experimenting with different configurations, combining engines of different power and duration to obtain different flight profiles, and includes a motor retaining system that locks the motors in place by means of stainless steel screws.

The construction is traditional, and requires some experience: the fins are light and robust plywood, and are inserted into the body through an interlocking system that ensures perfect alignment. The model requires coloring by means of spray paints and self-adhesive decals are included.

An interesting detail, common to the whole "Expert" series of Klima models, is the device for filtering the gas of the expulsion charge, which eliminates the need of protective wadding. Thanks to this system the parachute (nylon, pre-sewn and included) is perfectly protected and will last forever.

IMPORTANT: For the simultaneous ignition of all engines we strongly recommend using the Tapematch in conjunction with the Stage Igniters. You can find them in the Motors> Starters category.

In addition, to guide the model safely during the launch phase, it is necessary to use a 6 mm launch rod.

This rocket requires a launch pad with 6 mm launch rod like the Klima Launch Pad, or a larger one such as the Aerotech Mantis, and an electric launch controller as the Estes Electron Beam, the Estes Astron Launch Controller or the Klima Launch Controller.

The kit includes:

  • Every part needed to build the rocket model (tubes, rings, plastic parts, etc.)
  • Self-adhesive decals
  • Pre-sewn nylon parachute
  • Detailed instructions in english, french, german, spanish, italian

To assemble the rocket you need (not included):

Hobby knife, scissors, tweezers, ruler, pencil, aliphatic glue, masking tape, transparent adhesive tape, fine sandpaper, spray paints

To launch your rocket you need (not included):

  • Launch pad with 6 mm rod
  • Launch controller
  • Engines (see Recommended engine list)