¡Precio rebajado! Reloadable motor P38-1G - CTI Ver más grande

Reloadable motor P38-1G - CTI

Nuevo

Reloadable 38mm motor Cesaroni P38-1G. The aft threaded closure is not required because it is included in the motor reload.

Más detalles

Available

42,26 €

-10%

46,95 €

Ficha técnica

Length117 mm
Weight58,7 gr

Más

Pro-38 reloadable motor hardware is very easy to use. Select your reload, adjust the delay following your needs, push the reload into the casing and thread the rear closure. You do not need any additional closure because are both included in each reload. After each flight you just have to dispose of the burned reload and clean the motor. The motor can be used an indefinite number of times.

Cesaroni hardware is very easy to clean after each flight with damp cloth as the reloads do not leave many residues on the internal surface.

You can use reloads made for a shorter casing into a longer one with one or two Pro38 Spacers. Please remember these casings are not compatible with Aerotech reloads.

When to use this engine?

This motor uses type G reloads, which do not require an high power certification to be purchased. Therefore, you can use this motor in any rocket with a 38 mm motor mount, even those made also for H motors. This way you can launch the same rocket before and after having obtained your HPR certification.

The following reloads can be used with this motor:

127G46-CL-11A
129G79-SS-13A
141G115-WT-13A
137G58-WH-13A
134G60-RL-14A
141G78-BS-15A
121G69-SK-14A
128G185-VM-12A
150G50-IM-15A